Learning to Dress 3D People in Generative Clothing. Q Ma, J Yang, A Ranjan, S Pujades, G Pons-Moll, S Tang, MJ Black.
Date: June 2020. Source: 2020 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), Seattle, WA, USA. Abstract: Three-dimensional human body models are widely used in the analysis of human pose and motion. Existing models, however, are learned from minimally-clothed 3D scans and thus do not generalize to the complexity of dressed people in common […]Read More
Customized Facemasks for Continuous Positive Airway Pressure: Feasibility Study in Healthy Adults Volunteers.
Date: May 2020. Source: American Journal of Respiratory and Critical Care Medicine 2020; 201:A2432. Objective: : Obstructive sleep apnea (OSA) is a common sleep disorder in which individuals experience partial or complete stops in breathing due to the collapse of their upper airways. Currently, the standard treatment for OSA in adults is the delivery of […]Read More
Comparison of Different Kinesio Taping Techniques After Third Molar Surgery. Ö Gözlüklü, M Ulu, HÖ Gözlüklü. N Yilmaz.
Date: May 2020. Source: Journal of Oral and Maxillofacial Surgery Volume 78, Issue 5, Pages 695-704. Objective: Elastic therapeutic taping method has been shown to reduce pain and edema after surgery. The purpose of the present study was to compare the effects of 2 different Kinesio taping (KT) techniques on swelling, pain, and trismus after […]Read More
Thesis. Outcome assessment of facial orthopedics with taping for cleft lip deformities using 3D stereophotogrammetry. Peter Mankowski.
Date: May 2020. Source: Thesis. Master of Science, The Faculty of Graduate and Postdoctoral Studies, Craniofacial Science, The University of British Columbia. Background: Prior to operative correction of a cleft lip, presurgical orthopaedics (PSO) with facial taping is used to improve pre-maxillary and soft tissue alignment. Two commercially available taping systems, Dynacleft and 3MTM taping […]Read More
Simulation of tissue-prosthesis margin interface by using surface scanning and digital design for auricular prostheses. L McHutchion, D Aalto.
Date: April 2020 (Online). Source: The Journal of Prosthetic Dentistry. Presented at seventh Biennial Congress of the Advanced Digital Technology in Head and Neck Reconstruction Foundation in Tokyo, Japan (June 22, 2019). Statement of problem: One of the most challenging aspects of auricular prosthesis design and fabrication is ensuring that the prosthesis fits the patient […]Read More
Evaluation of soft-tissue changes in young adults treated with the Forsus fatigue-resistant device. B Akan, İ Veli.
Date: April 2020. Source: American Journal of Orthodontics and Dentofacial Orthopedics, Volume 157, Issue 4, Pages 481-489.e2. Highlights: • Forsus fatigue-resistant devices did not affect sagittal or vertical planes in postpeak patients. • Changes in maxilla and mandible were dentoalveolar only. • Significant differences in soft-tissue profiles in postpeak patients were not found. Introduction: This […]Read More
Evaluation of Changes in Nasal Projection After Surgically Assisted Rapid Maxillary Expansion With 3dMDface System. MH Büyükçavuş, Y Findik, T Baykul.
Date: April 2020. Source: The Journal of Craniofacial Surgery. DOI: 10.1097/scs.0000000000006436. Abstract: The most appropriate treatment option for maxillary expansion in adulthood due to increased cyanosis in sutures is surgically assisted maxillary expansion (SARME). Skeletal and dental changes are observed with SARME. Three-dimensional imaging techniques are gaining importance with the developing technology in evaluating the […]Read More
Lumbar posture assessment with fabric strain sensors. LQ Vu, KH Kim, LJH Schulze, SL Rajulu.
Date: March 2020. Source: Computers in Biology and Medicine, Volume 118, 103624. Abstract: Astronauts are at risk for low back pain and injury during extravehicular activity because of the deconditioning of the lumbar region and biomechanical demands associated with wearing a spacesuit. To understand and mitigate injury risks, it is necessary to study the lumbar […]Read More
Patient- and 3D morphometry-based nose outcomes after skeletofacial reconstruction. R Denadai, PY Chou, HJ Seo et al.
Date: March 2020. Source: Scientific Reports, Volume 10, Article No. 4246, https://doi.org/10.1038/s41598-020-61233-6. Abstract: Patient satisfaction with the shape and appearance of their nose after orthognathic surgery-based skeletofacial reconstruction is an important, but often overlooked, outcome. We assessed the nose-related outcomes through a recently developed patient-reported outcome instrument and a widely adopted 3D computer-based objective outcome […]Read More
3D soft‐tissue evaluation of a Class III treatment with rapid maxillary expander and face mask in pre‐pubertal phase – A retrospective cohort study. BK Đokić, A Zhurov, S Richmond et al.
Date: March 2020. Source: Orthodontic & Craniofacial Research, https://doi.org/10.1111/ocr.12373. Objective: The aim of this prospective controlled study was to evaluate the effectiveness of the rapid maxillary expander (RME) and face mask treatment using three‐dimensional soft‐tissue facial characteristics of pre‐pubertal Class III children. Setting and Sample Population: CLIII and non‐CLIII groups, both of 32 white children […]Read More
Nasal Alar Surface Area Differences After Unilateral Cleft Lip Repair. Long-Term Effects of the Perialar Incision. AT Perdanasari, RD Wagner, MJ Davis et al.
Date: March 2020 (Online). Source: Journal of Craniofacial Surgery, doi: 10.1097/SCS.0000000000006284. Background: The Millard rotation-advancement cleft lip repair is the most commonly performed cleft lip repair. An extended perialar incision allows for further advancement of the lateral lip element and improved positioning of the alar base. There is a lack of data evaluating differences in […]Read More
Assessing the Influence of Chin Asymmetry on Perceived Facial Esthetics With 3-Dimensional Images. T Dong, N Ye, L Yuan, S Wu, L Xia, B Fang.
Date: March 2020. Source: Journal of Oral and Maxillofacial Surgery. DOI: 10.1016/j.joms.2020.03.017. Objective: We used 3-dimensional (3D) images to assess the influence of chin asymmetry on perceived facial esthetics, investigate the cognitive boundaries of chin asymmetry among orthodontists, general dentists, and laypersons, and provide quantitative reference for clinical treatment. Materials and Methods: A 3D facial […]Read More
Three-Dimensional Facial Imaging for the Diagnosis of Complex Soft Tissue Secondary to Craniofacial Trauma. L Zou, S Holmes.
Date: March 2020. Source: Atlas of Operative Maxillofacial Trauma Surgery, pp 101-105, Springer, London. Abstract: Facial scanning is a relatively recent imaging modality that has been evolving over the past 30 years. It provides valid and reliable three-dimensional (3D) imaging. 3D facial images also provide objective quantifications of facial changes. Image capturing uses a noncontact […]Read More
Immune function during early adolescence positively predicts adult facial sexual dimorphism in both men and women. YZ Foo, LW Simmons, DI Perrett et al.
Date: February 2020 (Online). Source: Evolution and Human Behavior. https://doi.org/10.1016/j.evolhumbehav.2020.02.002. Abstract: Evolutionary theories suggest that humans prefer sexual dimorphism in faces because masculinity in men and femininity in women may be an indicator of immune function during development. In particular, the immunocompetence handicap hypothesis proposes that sexual dimorphism indicates good immune function during development because the […]Read More
Three-dimensional facial volume analysis using algorithm-based personalized aesthetic templates. AJ Tuin, JW Meulstee, TGJ Loonen et al.
Date: February 2020 (Online). Source: International Journal of Oral and Maxillofacial Surgery. Abstract: Three-dimensional stereophotogrammetry is commonly used to assess volumetric changes after facial procedures. A lack of clear landmarks in aesthetic regions complicates the reproduction of selected areas in sequential images. A three-dimensional volumetric analysis was developed based on a personalized aesthetic template. The […]Read More
Outcome of facial contour asymmetry after conventional two-dimensional versus computer-assisted three-dimensional planning in cleft orthognathic surgery. P Hsu, R Denadai, BCJ Pai et al.
Date: February 2020. Source: Scientific Reports, Volume 10, Article No. 2346, https://doi.org/10.1038/s41598-020-58682-4. Abstract: Computer-assisted 3D planning has overcome the limitations of conventional 2D planning-guided orthognathic surgery (OGS), but difference for facial contour asymmetry outcome has not been verified to date. This comparative study assessed the facial contour asymmetry outcome of consecutive patients with unilateral cleft […]Read More
A Comparison of 3D Facial Features in a Population from Zimbabwe and United States. E Bhaskar, CH Kau.
Date: February 2020. Source: European Journal of Dentistry, 14(01): 100-106, DOI: 10.1055/s-0040-1702258. Objectives: The purpose of this study was to determine the differences in three-dimensional (3D) facial features in a population from Zimbabwe and the United States. In addition, this study seeks to establish an average facial template of each population allowing clinicians to treat […]Read More
Reproducibility of Natural Head Position assessed with stereophotogrammetry. G Jakobsone, V Vuollo, P Pirttiniemi.
Date: February 2020. Source: Orthodontics & Craniofacial Research 23(1):66-71. doi: 10.1111/ocr.12344. Objective: The aim of this study was to assess the stability of Natural Head Position (NHP) over time using the 3dMDface System. Setting and Sample Population: This was an experimental study. Three-dimensional facial images of 40 students were captured on two different occasions, with […]Read More
Three-Dimensional Dynamic Analysis of the Facial Movement Symmetry of Skeletal Class III Patients With Facial Asymmetry. Z Xue; L Wu; TC Qiu.
Date: February 2020. Source: Journal of Oral and Maxillofacial Surgery, Volume 78, Issue 2, Pages 267-274. Objective: Dynamic asymmetry has not been as rigorously evaluated as static asymmetry for patients with skeletal deformity but could well be even more important. The aim of the present study was to evaluate the dynamic facial movement of Class […]Read More
Digital Workflow for Combined Orthodontics and Orthognathic Surgery. MH Elnagar, S Aronovich, B Kusnoto.
Date: February 2020. Source: Orthodontics for Oral and Maxillofacial Surgery Patient, an Issue of Oral and Maxillofacial Surgery Clinics of North America, Vol 32, No 1 (E-Book). Chapter: Digital Workflow for Combined Orthodontics and Orthognathic Surgery. Authors: Mohammed H Elnagar, DDS, MS, PhD; Sharon Aronovich, DMD, FRCD(C); and Budi Kusnoto, DDS, MS.Read More
Collagen 2A Type B Induction after 3D Bioprinting Chondrocytes In Situ into Osteoarthritic Chondral Tibial Lesion. B Gatenholm, C Lindahl, M Brittberg, S Simonsson.
Date: February 2020. Source: CARTILAGE. https://doi.org/10.1177/1947603520903788 Objective: Large cartilage defects and osteoarthritis (OA) cause cartilage loss and remain a therapeutic challenge. Three-dimensional (3D) bioprinting with autologous cells using a computer-aided design (CAD) model generated from 3D imaging has the potential to reconstruct patient-specific features that match an articular joint lesion. Design: To scan a human […]Read More
A broad autism phenotype expressed in facial morphology. DW Tan, MT Maybery, SZ Gilani et al.
Date: January 2020. Source: Translational Psychiatry, Volume 10, Article No. 7. Abstract: Autism spectrum disorder is a heritable neurodevelopmental condition diagnosed based on social and communication differences. There is strong evidence that cognitive and behavioural changes associated with clinical autism aggregate with biological relatives but in milder form, commonly referred to as the ‘broad autism […]Read More
Long-term comparison study of philtral ridge morphology with two different techniques of philtral reconstruction. FC-S Chang, C-G Wallace, YC Hsiao et al.
Date: January 2020 (Online). Source: International Journal of Oral and Maxillofacial Surgery. Abstract: Cleft lip and/or cleft palate are the most common congenital craniofacial anomalies. Philtral ridge morphology is an important aesthetic component of unilateral cleft lip (UCL) repair. To this end, we have developed two techniques of philtral ridge reconstruction: (1) asymmetric mattress muscle […]Read More
Learning Multi-human Optical Flow. A Ranjan, DT Hoffmann, D Tzionas et al.
Date: January 2020. Source: International Journal of Computer Vision 128, 873–890 (2020). https://doi.org/10.1007/s11263-019-01279-w. Abstract: The optical flow of humans is well known to be useful for the analysis of human action. Recent optical flow methods focus on training deep networks to approach the problem. However, the training data used by them does not cover the […]Read More
Is Ultrasonic Bone Scalpel Useful in Le Fort I Osteotomy? AE Demirbas, S Bilge, S Celebi, et al.
Date: January 2020. Source: Journal of Oral and Maxillofacial Surgery, Volume 78, Issue 1, Pages 141.e1-141.e10. Objective: Safety and precision are 2 main goals in research to improve bone cutting in maxillofacial surgery. The aim of this prospective clinical study was to analyze the outcomes using an ultrasonic bone scalpel versus a piezoelectric surgical device […]Read More
Unilateral Cleft Lip Nasal Deformity: Three-Dimensional Analysis of the Primary Deformity and Longitudinal Changes following Primary Correction of the Nasal Foundation. R Tse, R Knight, M Oestreich et al.
Date: January 2020. Source: Plastic and Reconstructive Surgery: Volume 145, Issue 1, p 185-199 doi: 10.1097/PRS.0000000000006389. Background: Objective assessment of the unilateral cleft lip nasal deformity and the longitudinal changes with treatment is critical for optimizing cleft care. Methods: Consecutive patients undergoing cleft lip repair and foundation-based rhinoplasty were included (n = 102). Three-dimensional images […]Read More
Digital Twin: Acquiring High-Fidelity 3D Avatar from a Single Image. R Wang, CF Chen, H Peng, X Liu, O Liu, X Li.
Date: December 2019. Source: Cornell University Library – arXiv.org, Computer Vision and Pattern Recognition. Abstract: We present an approach to generate high fidelity 3D face avatar with a high-resolution UV texture map from a single image. To estimate the face geometry, we use a deep neural network to directly predict vertex coordinates of the 3D […]Read More
Craniofacial Asymmetry from One to Three Years of Age: A Prospective Cohort Study with 3D Imaging. AM Launonen, V Vuollo, H Aarnivala, et al.
Date: December 2019. Source: Journal of Clinical Medicine, 9, 70; doi:10.3390/jcm9010070. Abstract: Deformational plagiocephaly (DP) is considered a risk factor for facial asymmetry. This cohort-based, prospective, follow-up study used three-dimensional (3D) stereophotogrammetry to assess the development of facial asymmetry in a normal birth cohort and to investigate the impact of DP on facial asymmetry for […]Read More
Craniofacial growth in infants with deformational plagiocephaly: does prematurity affect the duration of head orthosis therapy and the extent of the reduction in asymmetry during treatment? F Kunz, T Schweitzer, A Dörr et al.
Date: December 2019. Source: Clinical Oral Investigations. https://doi.org/10.1007/s00784-019-03159-6. Objective: Although prematurity is a risk factor for developing deformational plagiocephaly (DP), to our knowledge, there are no studies that have analyzed the impact of a premature birth on the duration of head orthosis therapy and the extent of the reduction in asymmetry during treatment. Materials and […]Read More
A Cross-Sectional Study to Understand 3D Facial Differences in a Population of African Americans and Caucasians. CH Kau, J Wang, M Davis.
Date: December 2019. Source: European Journal of Dentistry 2019; 13(04): 485-496 DOI: 10.1055/s-0039-3400551. Objective: The purpose of this cross-sectional retrospective study was to use three-dimensional surface imaging to determine gender dimorphism and facial morphological changes from adolescence to adulthood in African American and Caucasian populations. Materials and Methods: Three-dimensional images were captured and the total […]Read More
Sex‐specific variation in facial masculinity/ femininity associated with autistic traits in the general population. DW Tan, MT Maybery, L Ewing, JX Tay, PR Eastwood, AJO Whitehouse.
Date: December 2019. Source: British Journal Psychology. doi: 10.1111/bjop.12436. (Online) Abstract: Reports linking prenatal testosterone exposure to autistic traits and to a masculinized face structure have motivated research investigating whether autism is associated with facial masculinization. This association has been reported with greater consistency for females than for males, in studies comparing groups with high […]Read More
Learning to Dress 3D People in Generative Clothing. QL Ma, JL Yang, A Ranjan, S Pujades, G Pons-Moll, SY Tang, MJ Black.
Date: December 2019. Source: Cornell University Library – arXiv.org, Computer Vision and Pattern Recognition. Abstract: Three-dimensional human body models are widely used in the analysis of human pose and motion. Existing models, however, are learned from minimally-clothed 3D scans and thus do not generalize to the complexity of dressed people in common images and videos. […]Read More
Quantifying normal head form and craniofacial asymmetry of elementary school students in Taiwan. C-K Hsu, RR Hallac, R Denadai et al.
Date: December 2019. Source: Journal of Plastic, Reconstructive & Aesthetic Surgery, Volume 72, Issue 12, Pages 2033-2040. Background: Defining three-dimensional (3D) normal craniofacial morphology in healthy children could provide craniofacial surgeons a reference point to assess disease, plan surgical reconstruction, and evaluate treatment outcome. The purposes of this study were to report normal craniofacial form […]Read More
The Menpo Benchmark for Multi-pose 2D and 3D Facial Landmark Localisation and Tracking. J Deng, A Roussos, G Chrysos et al.
Date: November 2019. Source: International Journal of Computer Vision, Volume 127, pages 599–624, https://doi.org/10.1007/s11263-018-1134-y. Abstract: In this article, we present the Menpo 2D and Menpo 3D benchmarks, two new datasets for multi-pose 2D and 3D facial landmark localisation and tracking. In contrast to the previous benchmarks such as 300W and 300VW, the proposed benchmarks contain […]Read More
The normal evolution of the cranium in three dimensions. JW Meulstee, GA de Jong, WA Borstlap, et al.
Date: November 2019 (Online). Source: International Journal of Oral and Maxillofacial Surgery. Abstract: Insight into the growth and development of the normal newborn cranial shape is essential to monitor cranial development, to detect and diagnose abnormal skull shapes, and for the long-term follow-up of craniosynostosis surgery. The aim of this study was to analyse the […]Read More
Measurement of the Internal Shape of Power Grip in Wrist Ulnar/Radial Deviation. H Jung, S Mun, W Lee, H You.
Date: November 2019. Source: Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 63(1), 1149–1153. https://doi.org/10.1177/1071181319631527. Abstract: The present study proposes a method for measurement of the internal shape of power grip using casting and 3D scanning method. Three handle design dimensions and twelve handle design related hand dimensions were defined by referring hand […]Read More
Unilateral Cleft Lip Nasal Deformity: Foundation-Based Approach to Primary Rhinoplasty. RW Tse, E Mercan, DM Fisher, RA Hopper, CB Birgfeld, J Gruss.
Date: November 2019. Source: Plastic and Reconstructive Surgery: Volume 144 – Issue 5 – p 1138-1149 doi: 10.1097/PRS.0000000000006182. Background: Cleft lip results in disruption of the nasal foundation and collapse of tip structures. Most approaches to primary rhinoplasty focus on correction of lower lateral cartilages; however, recurrent deformity is common, and secondary revision is frequently […]Read More
Exploring the midline soft tissue surface changes from 12 to 15 years of age in three distinct country population cohorts. S Richmond, AI Zhurov, ABM Ali, P Pirttiniemi, T Heikkinen, V Harila, S Silinevica, G Jakobsone, I Urtane.
Date: November 2019. Source: European Journal of Orthodontics, https://doi.org/10.1093/ejo/cjz080. Introduction: Several studies have highlighted differences in the facial features in a White European population. Genetics appear to have a major influence on normal facial variation, and environmental factors are likely to have minor influences on face shape directly or through epigenetic mechanisms. Aim: The aim […]Read More
Professional Clinical Photography to Assist Patients with Pectus Carinatum. JA Yeats.
Date: November 2019. Source: Journal of Biocommunication, 43(2). https://doi.org/10.5210/jbc.v43i2.10230 Abstract: A photographic clinical role has been realized in our institution in the care of patients with Pectus Carinatum. A series of clinical photographs along with 3D imaging are now presented by our photographers to each patient in clinic to demonstrate changes over time in the […]Read More
Synthesizing Facial Photometries and Corresponding Geometries Using Generative Adversarial Networks. G Shamai, R Slossberg, R Kimmel.
Date: October 2019. Source: ACM Transactions on Multimedia Computing, Communications, and Applications, Article No.: 87 https://doi.org/10.1145/3337067. Abstract: Artificial data synthesis is currently a well-studied topic with useful applications in data science, computer vision, graphics, and many other fields. Generating realistic data is especially challenging, since human perception is highly sensitive to non-realistic appearance. In recent […]Read More
The development of a 3D body scan and composition database to assess body size perception in psychological research. N Maalin, SM Mohamed, RS Kramer, et al.
Date: October 2019. Source: 3DBODY.TECH 2019 – 10th International Conference and Exhibition on 3D Body Scanning and Processing Technologies, Lugano, Switzerland. Abstract: Recently, there has been a shift towards the use of 3D scanning technology in body size perception research. Based on limitations of previous methodologies there is a need to develop and validate female […]Read More
How the U.S. Sport Performance Apparel Industry Sizes Up to Female Plus Bodies. SL Solkolowski, J Silbert, L Griffin.
Date: October 2019. Source: 3DBODY.TECH 2019 – 10th International Conference and Exhibition on 3D Body Scanning and Processing Technologies, Lugano, Switzerland. Abstract: In the United States, about 68% of the female population is greater than a size 14, or plus size . This demographic represents a $21.4 billion industry . Over the last five years, […]Read More
Trends in Breast Measurements of Unilateral Breast Reconstruction Patients to Inform Bra Design. KM Nicklaus, E Jewett, C Liu et al.
Date: October 2019. Source: 3DBODY.TECH 2019 – 10th International Conference and Exhibition on 3D Body Scanning and Processing Technologies, Lugano, Switzerland. Abstract: Breast reconstruction patients face unique challenges in finding a properly fitting bra after breast surgery, leading to decreased bra comfort and psychosocial functioning. In addition to considerations such as location of seams and […]Read More
Development of a 3D Body Database to Improve Measures of Perceptual Male Body Image Distortion. SM Mohamed, N Maalin, RS Kramer, A Irvine, PL Cornelissen, KL Ritchie, MJ Tovee.
Date: October 2019. Source: 3DBODY.TECH 2019 – 10th International Conference and Exhibition on 3D Body Scanning and Processing Technologies, Lugano, Switzerland. Abstract: There are important limitations in the current methodological stimuli being used in perceptual body image research among men, including a reliance on unrealistic images, a lack of biometric validity, and little consideration of […]Read More
An Automated CNN-based 3D Anatomical Landmark Detection Method to Facilitate Surface-Based 3D Facial Shape Analysis. R Huang, M Suttie, JA Noble.
Date: October 2019. Source: Greenspan H. et al. (eds) Uncertainty for Safe Utilization of Machine Learning in Medical Imaging and Clinical Image-Based Procedures. CLIP 2019, UNSURE 2019. Lecture Notes in Computer Science, vol 11840. Springer, Cham. Abstract: Maternal alcohol consumption during pregnancy can lead to a wide range of physical and neurodevelopmental problems, collectively known […]Read More
A 3D Follow-Up Study of Cranial Asymmetry from Early Infancy to Toddler Age after Preterm versus Term Birth. AM Launonen, H Aarnivala, P Kyteas, et al.
Date: October 2019. Source: Journal of Clinical Medicine 2019, 8, 1665; doi:10.3390/jcm8101665. Abstract: : Preterm infants are at higher risk for both symmetrical and asymmetrical head molding. This study involved 3D stereophotogrammetry to assess the cranial growth, molding, and incidence of deformational plagiocephaly (DP) in preterm children compared to term born children. Thirty-four preterm infants […]Read More
Synthesizing Coupled 3D Face Modalities by Trunk-Branch Generative Adversarial Networks. B Gecer, A Lattas, S Ploumpis, et al.
Date: September 2019. Source: Cornell University Library – arXiv.org, Computer Vision and Pattern Recognition. Abstract: Generating realistic 3D faces is of high importance for computer graphics and computer vision applications. Generally, research on 3D face generation revolves around linear statistical models of the facial surface. Nevertheless, these models cannot represent faithfully either the facial texture […]Read More
The Influence of Visual Perspective on Body Size Estimation in Immersive Virtual Reality. A Thaler, S Pujades, JK Stefanucci, SH Creem-Regehr, J Tesch, MJ Black, and BJ Mohler
Date: September 2019. Source: ACM Symposium on Applied Perception 2019, University of Barcelona, Spain. Abstract: The creation of realistic self-avatars that users identify with is important for many virtual reality applications. However, current approaches for creating biometrically plausible avatars that represent a particular individual require expertise and are time-consuming. We investigated the visual perception of […]Read More
Volumetric Effect of Pregnancy on a Unilateral Facial Fat Graft. AJ Tuin, RH Rutger, FKL Frederik, et al.
Date: September 2019 (Online). Source: Plastic and Reconstructive Surgery – Global Open: Volume 7, Issue 9, p e2358. doi: 10.1097/GOX.0000000000002358. Abstract: Weight gain can affect the volume of a facial fat graft, resulting in unfavorable asymmetries. Weight gain during pregnancy is more complex and does not just entail an increase in adipose tissue. This case […]Read More
Do commonly available round facemasks fit near-term and term infants? Haase B, Badinska AM, Koos B, et al.
Date: September 2019 (ONLINE) Source: Archives of Disease in Childhood – Fetal and Neonatal Edition, doi: 10.1136/archdischild-2019-317531. Objective: With inappropriately large facemasks, it is more difficult to create a seal on the face, potentially leading to ineffective ventilation during neonatal stabilisation. We investigated whether commonly available round facemasks are of appropriate size by measuring facial […]Read More